NiCad Battery Charger Model: H02400918-US-1, CH-UN180
- This Universal Fast & Smart Charger is designed for charging NiMH / NiCad battery packs from 9.6V - 18V (9 to 15 cell packs)
- Excellent for 12V , 13.2V and 14.4V bikelight NiMH batteries pack.
- Just plug in and wait for the battery to charge. Red LED indicates charging, and Green LED means fully charged
- 120-240V AC input for worldwide use.
- Detects battery pack voltage and sets proper charging voltage automatically
- Cuts off power automatically using negative delta V IC when battery pack is fully charged.
- Built in IC protects battery from high-current, short circuit & reverse polarity.
- One temperature sensor outlet (Female BEC connector) is installed with the charger double protect the battery from overcharge conditions.
- Two charging levels, 0.9A and 1.8A, are selectable by a switch for both high capacity ( >1800mAh) and low capacity battery pack ( <1800mAh)
- For battery packs between 1800mah and 900 mah, use the low level switch - charging rate: 0.9A
- For battery packs over 1800mAh, use the high level switch - charging rate: 1.8A
This NiCad battery charger includes:
1. One standard 2 pin male universal connector with 12"" length cable installed with the charger
2. One 5' cable with female connector and two alligator clips which allow you to connect a battery pack to the smart charger.
3. One temperature sensor ( 70 deg C thermister ) is included. It must be plugged to battery charger and be attached to battery pack before charging to protect battery overheating. It will cut-off power if battery temperature is over 70 deg C.
| Weight: | 1.07 lbs |
| Details | |
| Bulb | LED |
| Capacity | 1.8 |
| Capacity Units | Amp |
| Chemistry | NiMH |
| Color | Blue |
| Connector Type | Alligator |
| Voltage | 12.00 |
Smart Charger for 9.6V-18V NiMH/NiCd Battery Packs, CHUN-180
- Model: CHUN-180
- UPC: NA
- Availability: 51
-
$27.00
-
- 100 or more $25.50